Power Distribution is a system, consisting of a Main Distribution Board (MDB), Sub Main Distribution Boards (SMDBs) and Final Distribution Boards, by which the electrical energy is transmitted via branches to reach the exact end user.
Main Distribution Boards
An MDB is a panel or enclosure that houses the fuses, circuit breakers and ground leakage protection units where the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer or an upstream panel. An MDB typically has a single or multiple incoming power sources and includes main circuit breakers and residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.
A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipment's and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.
Key features of Main Distribution Boards offered by AGS:
- Fully type tested assemblies as per IEC 61439-1
- Rated upto 6000A
- Rated operating voltage upto 690V
- Manufactured to Form 2, Form 3 & Form 4 construction
- Type tested for 85kA/1 sec, 50kA/3 sec
- Designed for both withdrawable & fixed versions
- Ample cabling space for easy connections
- Top and bottom cable entry.
- Panels for front or rear access to suit application
- Index of protection : IP 31 & IP 54
- Floor mounting
- Maximum safety & reliability
- Modular system with Customized design to meet end user requirements.
Sub-Main Distribution Boards
The MDB then feeds SMDBs, which is installed generally at the point where a large distribution cable terminates and several smaller sub-circuits start. These are the switchboards that although similar construction, are larger than a final distribution board circuit. The boards are installed midway through the power distribution system, at the point in a large distribution cable ends, and several smaller starting sub-circuits.
- Fully type tested assemblies as per IEC 61439-1
- Rated upto 1250A
- Rated operating voltage upto 690V
- Manufactured to Form 2 & Form 4 construction
- Type tested for 50kA/1 sec
- Ample cabling space for easy connections
- Top and bottom cable entry.
- Panels for front or rear access to suit application
- Index of protection : IP 31 & IP 54
- Wall mounting or free standing to suit application
Final Distribution Boards
The Sub-Main Distribution Boards feeds the Final Distribution Board, which then feeds electrical energy to the end user.
Compliant with IEC 61439-3
Current rating up to 250A
Index of protection : IP 41 & IP 55 as per IEC 60529
Available in Row type distribution, pan assembly (single or multi split arrangement) in flush or surface versions
Short circuit withstand : 17kA for 200ms
Adopted range to local regulations, quality makes and easy installation
